Electrical Engineering in Junagadh
Vision
  • Vision for the Electrical Engineering Department of NGI is to give better and better Electrical Engineers to the society.
  • Draw attention of Electrical Engineering students into research, advanced technology, application and development of Electrical Engineering in society.
  • Develop practical approach among students towards electrical engineering fields rather than exam oriented only.
  • Develop engineers who are original and independent thinkers along with the strong foundation in contemporary electrical engineering, basic science, mathematics, computing and communication.NGI is viewed as the Top Electrical Engineering Junagadh
Mission
  • Prepare the students with competencies required by the industries.
  • Develop practical approach among students towards electrical engineering fields to fulfill our goal and approach the vision.
  • Create atmosphere of Burden less study and analytically, research, interesting study of Electrical Engineering Department.
Course Objective

To inculcate in students the conceptual, technical, practical and analytical approach in electrical engineering wherein they are able to develop ability and skills.

Program Outcomes

Students graduating from the Electrical Engineering Department at NGI will be expected and prepared to exercise the skills and abilities  listed below. It also indicates how the Program Outcomes contribute to the Program Educational Objectives.

  1. Ability to apply knowledge of mathematics, science, and engineering.
  2. Ability to design and conduct experiments, as well as to analyze and interpret data.
  3. Ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability.
  4. Ability to function on multi-disciplinary teams.
  5. Ability to identify, formulate and solve engineering problems.
  6. Understanding of professional and ethical responsibility.
  7. Ability to communicate effectively.
  8. Broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context.
  9. Recognition of the need for, and an ability to engage in life-long learning.
  10. Knowledge of contemporary issues.
  11. Ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.
  12. Knowledge of probability and statistics, including applications to electrical engineering.
  13. Knowledge of mathematics through differential and integral calculus, and basic science, computer science, and engineering sciences, necessary to analyze and design complex electrical and electronic devices, software, and systems containing hardware and software components, as appropriate to electrical engineering.
  14. Knowledge of advanced mathematics, including differential equations, linear algebra, complex variables, and discrete mathematics.
Head of Department
  • Prof. Rakesh Akabari
    Prof. Rakesh Akabari

    Designation: H.O.D. & Assistant Professor
    Work Experience:
    4 years
    Qualification: 
    M.E.(Power System), B.E.(Electrical)

Faculty Profile
Industrial Visit
For 5th semester the industrial tour was organized at Kachchh Lignite Thermal Power Station.
An industrial tour was set at Kachchh Lignite Thermal Power Station is located on the Kutchh district (Gujarat) for 5th semester students. The plant is located near Panandhro village in Lakhpat taluka. The plant is adjacent of Lignite mines (operated by Gujarat Mineral Development Corporation) and receives lignite direct from the mines. ... Read More
For 7th sem the industrial visit was organized at ERDA at Vadodara.
Electrical Research and Development Association popularly known as ERDA is located in 25 acre plot at Makarpura Industrial Estate, Vadodara (Gujarat). ERDA was stablished by the Indian Electrical Industries & Utilities with the support of Government of India.Industrial Visit for the same organized for 7th semester students and vis... Read More
For 8th semester, the industrial tour was organized at Adani Port and Adani Power Ltd. at Mundra, Kutch.
Adani Power Plant is located at Mundra (Kutchh, Gujarat) which has 4620 MW Generation capacity. 8th semesterStudents of Electrical Engineering Department of NGI visited Mundra Thermal Power Plant and Adani Port at Mundra (Kutchh, Gujarat) on 3rd of February-2014. Students saw India’s first super critical unit of 660 MW.Students also vis... Read More
For 6th semester, the industrial tour was organized at Thermal Power Station Mahudi near Gandhinagar.
An industrial tour for 6th semester students of electrical engineering was organized on 4thof January-2014 at Thermal Power Station, Gandhinagar. There are two units of 120MW each and three units of 210MW.This TPS has total installed capacity of 870MW.Students got very interest to learn and knew about Boiler, Super Heater, Economiser,... Read More
For 4th semester the industrial tour was organized at Area Load Dispatch Center, Jetpur 400 KV substation.
There is an 400 kV Area Load Dispatch Centre at Dhareshwar at Jetpur (Gujarat)An Industrial Visit for 4th semester students was set on 6th of February-2014 at 400 KV Substation. Students studied and knew about power distribution and load sharing, how fault can be occurred and how fault can be solved in substation. Students also saw an... Read More
Lab Detail
  • EEE
    • KCL Circuit
    • KVL Circuit
    • Nodal Analysis and Mesh Analysis
    • Charging and Discharging of Capacitor
  • Electrical Machines
    • DC Shunt generator
    • DC Series generator
    • DC Motor and 3-phase alternator
    • AC and DC cut section motor
  • Electrical and Electronics Measurement
    • Maxwell’s bridge
    • Anderson’s bridge
    • Owen’s bridge
    • De Sauty’s bridge
    • Schering bridge
  • Industrial Instrumentation
    • LVDT
    • RTD
    • Rotameter
    • Flow meter
    • Various transducers
    • Water level indicator
  • Power System Protection
    • Radial Feeder Protection
    • Numerical protection of 3-phase induction motor
    • Numerical protection 3 phase Feeder
  • Micro Processor and Controller
  • Power Electronics
Results & Time Table
Teaching Scheme
Semester 1
GTU CodeSubject Short NameSubjectLectPracTutorialsCredits
2110014Calculus3025
2110002CSCommunication Skills2204
2110005EEEElements of Electrical Engineering4206
2110006EMEElements of Mechanical Engineering4206
2110013EGEngineering Graphics2406
2110007ESEnvironmental Studies3003

Semester 2
GTU CodeSubject Short NameSubjectLectPracTutorialsCredits
2110015MathsVector Calculus and Linear Algebra3025
2110003CPUComputer Programming and Utilization3216
2110011Physics3205
2110004ECEElements of Civil Engineering4206
2110012Workshop0404
2990001CPDContributor Personality Development400

Semester 3
GTU CodeSubject Short NameSubjectLectPracTutorialsCredits
2130002AEMAdvance Engineering Maths3025
2130004EEMEngineering Economics and Management3003
2130901CNCircuits and Networks4206
2130902AEAnalog Electronics3206
2310903EMMIElectrical Measurement and Measuring Instruments3206
2310904DCMTDC Machines and Transformer4206
2130005DE 1 ADesign Engineering 1 A0303

Semester 4
GTU CodeSubject Short NameSubjectLectPracTutorialsCredits
2140910NMEEDigital Electronics3205
2140906AMAC Machines4206
2140907ATHEApplied Thermal and Hydraulic Engineering3003
2140908EPGElectrical Power Generation4206
2140909FTField Theory3205
2141005SSSignals and Systems3205
2140002DE 1 BDesign Engineering 1 B030

Semester 5
GTU CodeSubject Short NameSubjectLectPracTutorialsCredits
2150903PE 1Power Electronics 13205
2150907DCMTDesign of DC Machines and Transformer4206
2150908EPS 1Electrical Power System 13003
2150909CSEControl System Engineering4206
2150910DLDDigital Logic Design3205
2150001DE II ADesign Engineering II A0303

Semester 6
GTU CodeSubject Short NameSubjectLectPracTutorialsCredits
2160902PE IIPower Electronics II3205
2160903MMAIMicroprocessor and Microcontroller Architecture and Interfacing4206
2160904HVHigh Voltage Engineering3205
2160907UEETUtilization of Electrical Energy and Traction4004
2160908EPS IIElectrical Power System II3205
2160001DE II BDesign Engineering II B300

Semester 7
GTU CodeSubject Short NameSubjectLectPracTutorialsCredits
170901IPSInter Connected Power System325
170902EMD 1Electrical Machine Design 13205
170903PSPPower System Protection3205
170904IIIndustrial Instrumentation3205
170906APE IAdvanced Power Electronics I4206
170001Project 1040

Semester 8
GTU CodeSubject Short NameSubjectLectPracTutorialsCredits
180901CEECommissioning of Electrical Equipments3205
180902EPUElectrical Power Utilization3003
18093PSPDPower System Practice and Design3003
180904EMD IIElectrical Machine Design II3205
180905Project II0808
180907APE IIAdvanced Power Electronics II420

Contact (Departmental)

Rakesh akabari

Prof. Pankaj Jadav