Vision
  • Vision for the Electrical Engineering Department of NGI is to give better and better Electrical Engineers to the society.
  • Draw attention of Electrical Engineering students into research, advanced technology, application and development of Electrical Engineering in society.
  • Develop practical approach among students towards electrical engineering fields rather than exam oriented only.
  • Develop engineers who are original and independent thinkers along with the strong foundation in contemporary electrical engineering, basic science, mathematics, computing and communication.NGI is viewed as the Top Electrical Engineering Junagadh
Mission
  • Prepare the students with competencies required by the industries.
  • Develop practical approach among students towards electrical engineering fields to fulfill our goal and approach the vision.
  • Create atmosphere of Burden less study and analytically, research, interesting study of Electrical Engineering Department.
Course Objective

To inculcate in students the conceptual, technical, practical and analytical approach in electrical engineering wherein they are able to develop ability and skills.

Program Outcomes

Students graduating from the Electrical Engineering Department at NGI will be expected and prepared to exercise the skills and abilities  listed below. It also indicates how the Program Outcomes contribute to the Program Educational Objectives.

  1. Ability to apply knowledge of mathematics, science, and engineering.
  2. Ability to design and conduct experiments, as well as to analyze and interpret data.
  3. Ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability.
  4. Ability to function on multi-disciplinary teams.
  5. Ability to identify, formulate and solve engineering problems.
  6. Understanding of professional and ethical responsibility.
  7. Ability to communicate effectively.
  8. Broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context.
  9. Recognition of the need for, and an ability to engage in life-long learning.
  10. Knowledge of contemporary issues.
  11. Ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.
  12. Knowledge of probability and statistics, including applications to electrical engineering.
  13. Knowledge of mathematics through differential and integral calculus, and basic science, computer science, and engineering sciences, necessary to analyze and design complex electrical and electronic devices, software, and systems containing hardware and software components, as appropriate to electrical engineering.
  14. Knowledge of advanced mathematics, including differential equations, linear algebra, complex variables, and discrete mathematics.
Head of Department
  • Prof. Rakesh Akabari
    Prof. Rakesh Akabari

    Designation: H.O.D. & Assistant Professor
    Work Experience:      8 years
    Qualification:     M.E.(Power System), B.E.(Electrical)

Faculty Profile
Industrial Visit
 Industrial Visit at UNIQUE POWER SYSTEM LTD., SUKHPUR, JUNAGADH
 The Unique Power Ltd. it is located at the sukhpur in Junagadh. This company is a manufacturer of the different electrical transmission line’s equipment like arcing horn, insulator, corona ring, different types of clamp, transmission wire like (ACSR & AAAC), resistance tester. The company also made the instrument for the measureme... Read More
Industrial Visit at EMBICON TECHNO HUB,JUNAGADH
 Embicon Tech Hub, mainly focused for designig the plc circuits, circuits based on the embedded or microcontroller based . They also offers training to the interested trainee candidates. The main guest at the venue is Mr. JivrajBhai Chothani. He was the former employee at the Reliance telecom and also serves the Indian Army. He shares h... Read More
For 5th semester the industrial tour was organized at Kachchh Lignite Thermal Power Station.
 An industrial tour was set at Kachchh Lignite Thermal Power Station is located on the Kutchh district (Gujarat) for 5th semester students. The plant is located near Panandhro village in Lakhpat taluka. The plant is adjacent of Lignite mines (operated by Gujarat Mineral Development Corporation) and receives lignite direct from the mines. ... Read More
For 7th sem the industrial visit was organized at ERDA at Vadodara.
 Electrical Research and Development Association popularly known as ERDA is located in 25 acre plot at Makarpura Industrial Estate, Vadodara (Gujarat). ERDA was stablished by the Indian Electrical Industries & Utilities with the support of Government of India. Industrial Visit for the same organized for 7th semester students and vis... Read More
For 8th semester, the industrial tour was organized at Adani Port and Adani Power Ltd. at Mundra, Kutch.
 Adani Power Plant is located at Mundra (Kutchh, Gujarat) which has 4620 MW Generation capacity. 8th semesterStudents of Electrical Engineering Department of NGI visited Mundra Thermal Power Plant and Adani Port at Mundra (Kutchh, Gujarat) on 3rd of February-2014. Students saw India’s first super critical unit of 660 MW.Students also vis... Read More
For 6th semester, the industrial tour was organized at Thermal Power Station Mahudi near Gandhinagar.
 An industrial tour for 6th semester students of electrical engineering was organized on 4thof January-2014 at Thermal Power Station, Gandhinagar. There are two units of 120MW each and three units of 210MW.This TPS has total installed capacity of 870MW. Students got very interest to learn and knew about Boiler, Super Heater, Economiser,... Read More
For 4th semester the industrial tour was organized at Area Load Dispatch Center, Jetpur 400 KV substation.
 There is an 400 kV Area Load Dispatch Centre at Dhareshwar at Jetpur (Gujarat) An Industrial Visit for 4th semester students was set on 6th of February-2014 at 400 KV Substation. Students studied and knew about power distribution and load sharing, how fault can be occurred and how fault can be solved in substation. Students also saw an... Read More
Lab Detail
  • EEE
    • KCL Circuit
    • KVL Circuit
    • Nodal Analysis and Mesh Analysis
    • Charging and Discharging of Capacitor
  • Electrical Machines
    • DC Shunt generator
    • DC Series generator
    • DC Motor and 3-phase alternator
    • AC and DC cut section motor
  • Electrical and Electronics Measurement
    • Maxwell’s bridge
    • Anderson’s bridge
    • Owen’s bridge
    • De Sauty’s bridge
    • Schering bridge
  • Industrial Instrumentation
    • LVDT
    • RTD
    • Rotameter
    • Flow meter
    • Various transducers
    • Water level indicator
  • Power System Protection
    • Radial Feeder Protection
    • Numerical protection of 3-phase induction motor
    • Numerical protection 3 phase Feeder
  • Micro Processor and Controller
  • Power Electronics
Results & Time Table
Sem 1
Sem 2
Sem 3

Time Table

Sem 4
Sem 5
Sem 6
Sem 7
Sem 8
Download
Teaching Scheme
Semester 1
GTU Code Subject Short Name Subject Lect Prac Tutorials Credits
3110002 ENG English 2 2 0 3
3110018 PHY Physics 3 2 0 4
3110005 BEE Basic Electrical Engineering 3 2 0 4
3110014 Maths-I Mathematics – I 3 0 2 5
3110013 EGD Engineering Graphics & Design 2 4 0 4

Semester 2
GTU Code Subject Short Name Subject Lect Prac Tutorials Credits
3110003 PPS Programming for Problem Solving 3 2 0 4
3110006 BME Basic Mechanical Engineering 3 2 0 4
3110007 ES Environmental Sciences 2 0 2 0
3110012 MP Workshop/ Manufacturing Practices 0 4 0 2
3110015 Maths-II Mathematics –2 0 4 0 2
3110016 BE Basic Electronics 3 2 0 4

Semester 3
GTU Code Subject Short Name Subject Lect Prac Tutorials Credits
2130002 AEM Advance Engineering Maths 3 0 2 5
2130004 EEM Engineering Economics and Management 3 0 0 3
2130901 CN Circuits and Networks 4 2 0 6
2130902 AE Analog Electronics 3 2 0 6
2310903 EMMI Electrical Measurement and Measuring Instruments 3 2 0 6
2310904 DCMT DC Machines and Transformer 4 2 0 6
2130005 DE 1 A Design Engineering 1 A 0 3 0 3

Semester 4
GTU Code Subject Short Name Subject Lect Prac Tutorials Credits
2140910 NMEE Digital Electronics 3 2 0 5
2140906 AM AC Machines 4 2 0 6
2140907 ATHE Applied Thermal and Hydraulic Engineering 3 0 0 3
2140908 EPG Electrical Power Generation 4 2 0 6
2140909 FT Field Theory 3 2 0 5
2141005 SS Signals and Systems 3 2 0 5
2140002 DE 1 B Design Engineering 1 B 0 3 0

Semester 5
GTU Code Subject Short Name Subject Lect Prac Tutorials Credits
2150903 PE 1 Power Electronics 1 3 2 0 5
2150907 DCMT Design of DC Machines and Transformer 4 2 0 6
2150908 EPS 1 Electrical Power System 1 3 0 0 3
2150909 CSE Control System Engineering 4 2 0 6
2150910 DLD Digital Logic Design 3 2 0 5
2150001 DE II A Design Engineering II A 0 3 0 3

Semester 6
GTU Code Subject Short Name Subject Lect Prac Tutorials Credits
2160902 PE II Power Electronics II 3 2 0 5
2160903 MMAI Microprocessor and Microcontroller Architecture and Interfacing 4 2 0 6
2160904 HV High Voltage Engineering 3 2 0 5
2160907 UEET Utilization of Electrical Energy and Traction 4 0 0 4
2160908 EPS II Electrical Power System II 3 2 0 5
2160001 DE II B Design Engineering II B 3 0 0

Semester 7
GTU Code Subject Short Name Subject Lect Prac Tutorials Credits
2170901 IPS Inter Connected Power System 3 2 5
2170908 SGP Switch Gear and Protection 4 2 0 6
2171003 DSP Digital Signal Processing 4 2 0 6
Departmental Elective – II 3 2 0 5
2170004 Project 1 0 8 0

Semester 8
GTU Code Subject Short Name Subject Lect Prac Tutorials Credits
2180901 TCEE TESTING AND COMMISSIONING OF ELECTRICAL EQUIPMENTS 3 2 0 5
2180903 PSPD POWER SYSTEM PLANNING AND DESIGN 3 2 0 5
2180905 Project II Project II 0 10 0 10
2180909 PSOC Power System Operation and Control 4 0 0 4
Department Elective III 3 2 0 5

Contact (Departmental)

Prof. Rakesh akabari

PROF. SURESHKUMAR TANK